ejotherm® STR U 2G

Specification

  • Applications

    Universal screw-in anchor for countersunk and surface fixed installation in concrete and masonry

     

    • For all substrates (A, B, C, D, E)
    • For all insulation boards
    • For countersunk and surface fixed instalaltion
    • For homogeneous surfaces and even rendering
    • Up to 40% faster installation
    • With European Technical Approval (ETA)
  • Properties

    • Approved for all building materials
    • Countersunk installation - EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust
    • Up to 40% fastener installation
    • Reduced thermal transmission (0.001 W/K)
    • Surface fixed installation using ejotherm STR plug
    • Short embedment depths, high loads for maximum safety and economic anchor usage
    • Permanent contact pressure
    • Premounted screw for quick installation
    • 100% setting control: the countersunk installation of the washer indicates safe anchorage
  • Technical specifications

    • Anchor diameter: 8 mm
    • Washer diameter: 60 mm
    • Drill hole depth, countersunk installation h1 ≥: 50 mm (90 mm)
    • Drill hole depth, surface fixed installation h2 ≥: 35 mm (75 mm)
    • Anchorage depth hef≥: 25 mm (65 mm)
    • Screw drive: TX30
    • Point thermal transmission χ 
      countersunk installation: 0,001 W/K
      surface fixed installation: 0,002 W/K
    • Use categories acc. to ETA*: A, B, C, D, E
    • German DIBt approval: Z-21.2-1769
    • European Technical Approval: ETA-04/0023

    Values in parentheses: anchoring in aerated concrete (use category E)
    *Specification according to ÖNORM B 6124 for concrete, solid brick and vertical brick

     

    Characteristic loads:
     

    Building material class A:

    • Normal weight concrete C 12/15 acc. to EN 206-1: 1.5 kN
    • Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 1.5 kN
    • Pre-cast concrete panel C16/20 - C50/60: 1.5 kN

    Building material class B:

    • Clay bricks (Mz) acc. to DIN 105: 1.5 kN
    • Solid lime sandstone (KS) acc. to DIN EN 106: 1.5 kN
    • Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.6 kN

    Building material class C:

    • Vertically perforated clay bricks (Hlz) acc. to 105: 1.2 kN
    • Vertical coring reference bricks (Hlz) acc. to ÖNORM B 6124: 0.75 kN
    • Sand-lime perforated (KSL) acc. to EN 106: 1.5 kN
    • Lightweight concrete hollow blocks (HbL)acc. to DIN 18151: 0.6 kN

    Baustoffklasse D:

    • Lightweight aggregate concrete (LAC): 0.9 kN

    Building material class E:

    • Autoclaved aerated concrete P2 - P7: 0.75 kN

    For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.

ETICS products are only available from system suppliers

Filter

Selected filters

    Orderidentifier Article Number Washer diameter mm Anchor diameter mm Length mm Substrate category Unit
    ejotherm STR U 2G 115 8719115400 60.0 8.0 115.0 B 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    115.0
    Substrate category
    B
    Construction way
    countersank and surface fixed installation
    tolerance compensation
    3.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 115
    Unit
    100
    ejotherm STR U 2G 135 8719135400 60.0 8.0 135.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    135.0
    Substrate category
    A B C D E show more
    Construction way
    countersank and surface fixed installation surface fixed installation only
    tolerance compensation
    10.0 30.0 50.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 135
    Unit
    100
    ejotherm STR U 2G 155 8719155400 60.0 8.0 155.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    155.0
    Substrate category
    A B C D E show more
    Construction way
    countersank and surface fixed installation surface fixed installation only
    tolerance compensation
    10.0 30.0 50.0 70.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 155
    Unit
    100
    ejotherm STR U 2G 175 8719175400 60.0 8.0 175.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    175.0
    Substrate category
    A B C D E show more
    Construction way
    countersank and surface fixed installation surface fixed installation only
    tolerance compensation
    10.0 30.0 70.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 175
    Unit
    100
    ejotherm STR U 2G 195 8719195400 60.0 8.0 195.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    195.0
    Substrate category
    A B C D E show more
    Construction way
    surface fixed installation only countersank and surface fixed installation
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 195
    Unit
    100
    ejotherm STR U 2G 215 8719215400 60.0 8.0 215.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    215.0
    Substrate category
    A B C D E show more
    Construction way
    surface fixed installation only countersank and surface fixed installation
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 215
    Unit
    100
    ejotherm STR U 2G 235 8719235400 60.0 8.0 235.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    235.0
    Substrate category
    A B C D E show more
    Construction way
    countersank and surface fixed installation
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 235
    Unit
    100
    ejotherm STR U 2G 255 8719255400 60.0 8.0 255.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    255.0
    Substrate category
    A B C D E show more
    Construction way
    countersank and surface fixed installation
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 255
    Unit
    100
    ejotherm STR U 2G 275 8719275400 60.0 8.0 275.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    275.0
    Substrate category
    A B C D E show more
    Construction way
    surface fixed installation only countersank and surface fixed installation
    tolerance compensation
    90.0 110.0 70.0 50.0 30.0 10.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 275
    Unit
    100
    ejotherm STR U 2G 295 8719295400 60.0 8.0 295.0 A, B, C, D, E 100

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    295.0
    Substrate category
    A B C D E show more
    Construction way
    surface fixed installation only countersank and surface fixed installation
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 295
    Unit
    100